All Terrain CranesATC-3275


    Please type in your email address to download the spec sheet.

    Mobile Cranes

    Walk Around

    Top Features

    Outstanding mobility on the road and on the job site

    • Cruise control
    • Five stage intarder brake control lever
    • Three stage engine compression brake
    • Ether injection system – optional
    • Automated transmission (no clutch pedal) —12 speeds forward, 2 speeds reverse with two modes of operation: fully automatic and semi-automatic
    • 2-speed auxiliary transmission
    • Job site travel is permissible with all 156,500 lbs |70 987 kg of counterweight for exceptional job site versatility.
    • 0.5 mph |0.80 km/hr job site travel
    • Highway speeds up to 62 mph |99.78 km/hr unmatched in the industry today.
    • 7-section pin & latch boom with attachment flexibility
    • Big, wide cab with outstanding visibility
    • Counterweight flexibility, big engine and transmission power, along with hydro-gas suspension promise incredible mobility on the road or on the job


    Powerful and responsive hydraulics

    • Seven pumps, pressure compensated hydraulic system allows simultaneous and precise function of boom hoist, winch, and swing.
    •  Two-speed hydraulic piston motor hoist system delivers superior hoisting. Matched size front and optional rear winches provide equal max line pulls of 25,955 lbs |115.5 Kn and max line speeds of 405 fpm |123.4 m/min on 15” |38.1 cm root diameter grooved drums.
    • Drum rotation indicators – standard.
    • Two bi-directional hydraulic swing motors mounted to a planetary reduction unit for 360° continuous smooth swing. Spring applied hydraulic released 360° swing park brake provides infinite swing park positions as well as free swing when control is in neutral position.

    Pin & latch boom with attachment flexibility

    • Quick reeve boom head eliminates the need to remove the becket when it becomes necessary to change the reeving
    • Eight extend modes for superior capacities throughout the extension range
    • Available two or three-piece bi-folding lattice fly which allow the tip section to be stored, thus enhancing the lifting performance when using the base section
    • Boom requires no greasing because of ingenious Teflon wear pucks impregnated in the full contact wear pads
    • Two available offset fly options: manual offset with 2°, 15°, 30°, and 45°, and a hydraulic offset with 2° – 45° with no capacity deduction for luffing loads
    • No deducts for stowed attachments

    Multiple counterweight configurations give you capacities for any size job

    •  Standard – Total of 36,000 lbs |16 329 kg of removable counterweights. Capacities for three different counterweight configurations.
    • Optional – Up to 156,500 lbs |70 987 kg of removable counterweights. Capacities for up to eight different counterweight configurations.
    • All configurations can be raised and lowered by hydraulic cylinders from the comfort of the operator’s cab for ease of installation and removal

    Telematics. You own the data!

    Cellular-based data logging and monitoring system that provides:

    • Viewing options for sharing data with distributor and Link-Belt
    • Location and operational settings
    • Monitor routine maintenance intervals
    • Crane and engine monitoring
    • Diagnostic and fault codes

    Roomier and quieter operator’s cab

    • Tilt cab up to 20º
    • Extra large front window almost seamlessly merges into the roof window
    • All gauges, switches, indicators, and controls are placed in the operators forward line of sight and backlit for nighttime operation
    • Pull-out Cab Walk for easy access to and from the operator’s cab
    • Outrigger and carrier engine controls
    • Right side swing, main, and auxiliary winch cameras
    • AM/FM radio

    Breakthrough transportability

    • Unlike any all terrain the ATC-3275 can travel at a highway speed of 62 mph |100 kph.
    • Transports with only four overflow loads, while other all terrains in its class require up to six.
    • Drive line features of anti-lock (ABS) disc brakes, transmission intarder, and true engine compression brake.
    • The hydro-gas suspension delivers great articulation for jobsites and yields a smooth ride on the highway

    Designed with transport in mind

    • Each overflow load weights under 45,000 lbs |20 412 kg



    Expand All
    • 43.7 ft to 223 ft |13.3-68 m 7-section formed pin & latch boom
    • Eight boom extend modes provide superior capacities: EM1-EM8
    • Optional 12-40-67 ft |3.65-12.2-20.42 m three-piece, bi-fold, on-board lattice attachment with 2 º, 15 º, 30 º, and 45 º manual offsets, and 2 º – 45 º hydraulic offsets
    • Optional two 25 ft |7.62 m lattice extensions plus 67 ft |20.42 m three-piece, bi-fold, on-board lattice fly provide a total attachment length of 117 ft (35.66 m)
    • 350 ft | 106.8 m maximum tip height
    • Modular style counterweights – 156,500 lbs |70 987 kg
    • 25,955 lbs |115.5 kN maximum winch line pull
    • 405 fpm |123.4 m/min maximum winch line speed
    • Tilting operator’s cab
    • Automated manual transmission with 2-speed auxiliary transmission
    • Anti-lock (ABS) disc brakes
    • “Stow ‘n Go” steel pontoons
    • LED night time lighting package

    Galadari Trucks & Heavy Equipment