Cold Milling, Stabilizer and RecyclingBS 10

    <

    Please type in your email address to download the spec sheet.

    Road Construction Equipment

    Walk Around

    Top Features

    BS 10 :

    • Capacity : 10 m3
    • 1 axle trailer (bottom hitched) or truck mounted
    • 2,4 m spreading width
    • Simple rugged spreading unit
    • Spreading quantity automatic control depending on speed

    Accurate Spreading with Low TCO’s:

    HIGH SPREADING CAPACITY

    • Closed 10 m3 tank
    • Unique feeding system

    HIGH PRECISION SPREADING

    • 1 dosing section-Variable spreading width, homogenous computer controlled dosing

    STABILITY AND SAFETY

    • Hydraulic or pneumatic braking system-Large diameter wheels

    RELIABLE DRIVE SYSTEM

    • Simple and independent, closed hydraulic system
    • Easy operation with each standard tractor
    • Various hitches available-PTO with 540 rpm

    BS 10 – Trailer :

    • Empty Weight:6.090 kg
    • Payload:10.000 kg
    • Max.working weight:16.090 kg

    BS 10 -Tractor :

    • Performance:> 120 hp
    • Slow Speed gear:1.5 km/h
    • Weight Category:> 4t
    • PTO drive with min.: 540 rpm
    • Hydraulic braking system or 2 Circuit Air braking system

    Towing Hitches:

    • Standard -Rockinger  Towing Eye with Ø 40mm
    • Option -Rockinger Towing Eye with Ø 50mm
    • Option -Scharmüller Towing Hitch (also known as “K80 Coupling”)

    PTO drive:

    • Pump drive with wide angle cardan shaft
    • 540 rpm at PTO
    • All common profiles available

    Spreading capacity:

    • 3″ filling valve
    • Standard 3″ threat
    • 2 filling necks (left/right)
    • Pressure relieved
    • Safe handling
    • Easy adaptation for local market standards
    • 2 Binder level sensors (min/max)
    • Acoustic filling level signal

    HOPPER & SLAT CONVEYOR :

    • Big Tank (10 m3)
    • Upper part of slat conveyor transport the material to the dosing channel
    • Lower part of slat conveyor controls the dosing and spreads the material to the ground
    • Additional support reduce the pressure on conveyor
    • Precise spreading result
    • Simple and rugged system

    AUTOMATIC  SLAT CONVEYOR TENSIONER :

    • Setup done in factory
    • No re-tightening needed
    • Maintenance free

    AUTOMATIC  DOSING AS STANDARD:

    • Automatic spreading quantity control : Dosing is adjusted according to the working speed for a uniform spreading quantity
    • Radar sensor for speed pickup as standard
    • Rpm sensor at the slat conveyor
    • Standard-Simple rugged control box in the operator’s cab to setup and operate the spreader
      -Quantity setting
      -Filling-Stop
      -Spreading selector
      -Tank full / empty check lights
      -On/Off Switch for working lights and other installed options
    • Option-Control Panel (touchscreen) included in the electronic weighing system

    ELECTRONIC WEIGHING DEVICE (OPTION)

    ELECTRONIC WEIGHING SYSTEM FOR 12 V OR 24 V POWER SUPPLY

    • Automatic dosing system with correction coefficient
    • 4 sensors with strain gauges are located between bunker and frame
    • Large colour monitor in driver’s cab shows important data during operation and filling

    WEIGHING PLATE 1/2 m2(OPTION)

    WEIGHING PLATE (FOR MANUAL DOSAGE CONTROL)

    • Including Mechanical scale
    • Easy Storage directly on the spreader
    • Simple calculation of spreading quantity per m2

    VARIABLE WORKING WIDTH

    • 4 different working widths are settable – 1/1,5/2/2,4 m
    • Simple, rugged adjustment

    BRAKING SYSTEMS

    • Standard-Hydraulic Braking System (1 pressure line),Locking/Parking brake function
    • Option-Dual Circuit pneumatic brake system,Locking/Parking brake function

    TIRE SETUP AND AXLE

    • Large Tires – Very low ground pressure, Less pulling forces needed
    • Good handling on very soft ground
    • Fender as standard

    LED WORK LIGHTS

    • 2 LED backlights as standard
    • Activated  from the driver’s cab

    FULL LIGHTENING SYSTEM AS STANDARD

    • Rear,Stop and direction Indicator LED lights
    • LED Warning beacon (removable)
    • Reflectors
    • License plate light

    TOOL BOX

    • Large lockable toolbox for storage of Dosing computer,Handscale,Tools,Warning Beacon and Manuals

    RELIABLE DRIVE SYSTEM

    • Separate large Hydraulic tank
    • No oil cooler needed as surface and capacity of tank is big enough
    • Pressure and return flow filter
    • Oil gauge glass with an integrated thermometer
    • Best availability
    • Easy design for tough environment

     

    Specs

    Expand All
    Specifications

    Standard Equipment

    Expand All
    BS 10
    • Tyres with Ø 1,650 mm and width 650 mm (BS 10)
    • Hydraulically-controlled brake
    • LED rear and brake lights
    • Speed-dependent dosage
    • Radar sensor for speed detection
    • 2 LED working head lights at the rear
    • Compressed air filling from left and right
    • Variable working width
    • Towing coupling Rockinger Ø 40 mm

    Optional Equipment

    Expand All
    BS 10
    • Weighing plate for dosage control
    • Electronic weighing device
    • Towing coupling K80 (Scharmüller)
    • Towing coupling Rockinger Ø 50 mm
    • Pneumatic brake system
    • Device for Big Bag or silo filling from above
    • Pneumatic compressor 1,200 l – 8 bar, for cleaning
    • Pneumatic compressor 8,000 l – 2 bar, for filling

    Galadari Trucks & Heavy Equipment