Cold Milling, Stabilizer and RecyclingBS 12000

Please type in your email address to download the spec sheet.

Road Construction Equipment

Walk Around

Top Features

BS 12000 :

  • Capacity : 12 m3
  • 1 axle trailer
  • 1 x dosing unit
  • 2 x spreader augers
  • 2,4 m spreading width (2.8m opt)
  • Manual spreading quantity control

BS 12000 SPREADING WITH LOW TCOs:

EASY OPERATION WITH EACH STANDARD TRACTOR

  • Standard tractor hitch PTO with 540 rpm

HIGH SPREADING CAPACITY

  • Closed 12 m³ tank
  • Unique feeding system

RELIABLE DRIVE SYSTEM

  • Independent, closed hydraulic system

STABILITY AND SAFETY

  • 2 Circuit breaking system
  • Large diameter wheels

SIMPLE SPREADING SYSTEM

  • Dosing section
  • Auger distribution and mechanically  adjustment left/right

SPECIFICATION TRACTOR-TRAILER

  • Empty Weight:6.200 kg
  • Payload:11.500 kg
  • Max. working weight:17.700 kg

TRACTOR

  • Performance ca.:140-160 hp
  • Slow speed gear :1.5 km/hr
  • Weight category ca.:6-8 t
  • PTO drive with min. :540 rpm
  • 2 circuit air breaking system

TOWING HITCH

  • Mechanical Parking Support

PTO DRIVE

  • Closed Hydraulic System
  • Two circuit System (Tractor+Trailer)
  • No influence on dosing accuracy
  • Double pump with front gear box
  • No axial forces
  • PTO Shaft with 540 rpm
  • Pump drive with wide angle cardan shaft
  • Different profiles for major tractors available

SPREADING CAPACITY

  • 3″ filling valve
  • Standard 3″ threat
  • Pressure relieved
  • Safe handling
  • Easy adaptation for local market standards
  • Large tank ventilation
  • No risk of over pressure inside the tank
  • Big open 12 m3 hopper
  • Upper part of slat conveyor disturbs the material
  • Lower part of slat conveyor feed the material to the back
  • No clocking material
  • Additional support reduce the pressure on slat conveyor
  • High feeding quality of dosing chambers
  • Precise spreading result
  • Sensors for binding level
  • Optimal binder quantity for dosing system – Homogeny filling of dosing unit
  • Best Spreading quality

OPTIONS

  • Second filling neck
    – Advantage on narrow road construction sites
    – Filling from booth sides
    – Higher flexibility and performance
  • Alternative filler connector
  • Acoustic filling signal
    – Reduced dust during filling process

OPERATION PANEL STANDARD

  • Panel inside tractor cabinet
  • On/Off
  • Conveyor On / Off
  • Dosing Unit On/Off
  • Augers On/Off
  • Adjustment of RPM for dosing unit

OPTION BS 12000 2,8 M SPREADING WIDTH

  • 2800 mm wide spreading unit
  • 1 dosing units
  • One distribution augers underneath the dosing chambers
  • Mechanically adjustment for half lane spreading ->Variable spreading width

STABILITY AND SAFETY

  • Largest tyres in the market
  • Lowest ground pressure in the market
  • Less Pulling forces needed
  • Good handling even on soft ground conditions
  • 2 Circuit Breaking system
  • Parking brake
  • Brake Shoe
  • Full lightening system- Rear, stop and direction indicator lights
  • Position lights

RELIABLE DRIVE SYSTEM

  • Separate large hydraulic tank
  • Independent from tractor
  • No oil cooler needed
  • Surface and capacity of tank is big enough
  • No cleaning needed
  • Best availability
  • Easy design for tough environment

 

Specs

Expand All
Specifications

Standard Equipment

Expand All
BS 12000
  • 1 rotary-gate valve
  • Connection for compressed air filling, left
  • Weighing plate for check weighing
  • Tires with Ø 1750 mm and width 750 mm
  • Pneumatic brake system
  • Working width 2,4 m with mech. half-sided shutdown

Optional Equipment

Expand All
BS 12000
  • Optional compressed air filling from the right
  • Shaft speed
  • Audible filling level signal
  • Working width 2,8 m with mech. half-sided shutdown

Our Latest & Best Selling Models

Choose similar models from our latest and best selling range of products

Galadari