DozersD475A-5E0

• Air conditioner with heater and defroster
• Air-suspension seat
• Alternator, 90 A/24 V
• Auto-priming system
• Back-up alarm
• Batteries, 200 Ah/4 x 12 V
• Blower fan
• Decelerator pedal
• Dry-type air cleaner with dust evacuator and dust indicator
• Eight-roller track frames
• Final drive case wear guard
• Hinged under guard with front pull hook
• Hydraulic track adjusters
• Lighting system (including four front and two rear lights)
• Lockup torque converter
• Mirror
• Mirror, rearview
• Muffler with rain cap
• Perforated front mask
• Radiator reserve tank
• ROPS brackets
•  Seat belt
• Segmented sprockets
• Shoes, 710 mm 28″ extreme service,single-grouser
• Starting motors, 2 x 7.5 kW/24 V
• Steel cab
• Steering control
• Sun visor
• TORQFLOW transmission
• Track roller guards
• VHMS (without orbcomm)
• Warning horn
• Water separator
• Wet steering clutches

ROPS*:
Weight . . . . . . . . . . .. . . 940 kg 2,070 lb
Dimension:
Width . . . . . . . . . . . . . . . 1940 mm 6’4″
*Meets ISO 3471, SAE J1040 APR88, ROPS standards.

Steel cab**:
Weight . . . . . . . . . . . . . . . . 455 kg 1,000 lb

Dimension:
Length. . . . . . . . . . . . . . . 1790 mm 5’10”
Width . . . . . . . . . . . . . . . . 1455 mm 4’9″
Height from compartment floor to ceiling . . . . . . . . 1530 mm 5’0″
**Meets ISO 3449 FOPS standard

• Additional cab heater
• Battery isolator
• Coal dozer
• Counterweight
• Double wiper
• Dual tilt dozer
• Fast fuel fill
• Fire extinguisher
• Hydraulics for ripper
• Lattice front mask
• Light for ripper
• Orbcomm
• Prelubrication
• Push plate
• Radio-AM/FM cassette
• Safety glass
• Shoes
  —810 mm 32″
  —910 mm 36″
• Spill guards
• Strengthened Semi-U blade
• Strengthened U blade
• Track shoe slip control system

Variable giant ripper:
Variable, parallelogram single-shank ripper ideal for ripping up tough material. Ripping angle is variable. Ripping depth is adjustable in four stages by a hydraulically controlled pin puller.

Weight (including hydraulic control unit) . . . . . . . . 7360 kg 16,230 lb
Beam length . . . . . . . . . . . . 1477 mm 4’10”
Maximum lift above ground . 1196 mm 3’11”
Maximum digging depth . . . . 1744 mm 5’9″

Multi-shank ripper:
Hydraulically controlled parallelogram ripper with three shanks. Ripping angle variable  and depth adjustable in two stages

Weight (including hydraulic control unit) . . . . .  . . 9720 kg 21,430 lb
Beam length . . . . . . . . . . . . 3085 mm 10’1″
Maximum lift above ground . 1196 mm 3’11”
Maximum digging depth . . . . 1124 mm 3’8″