JTHB seriesMedium Range

Please type in your email address to download the spec sheet.

Hydraulic Breakers

Walk Around

Top Features

High impact energy

A combination of 70% nitrogen gas and 30% hydraulic energy provides powerful impact for high-performance productivity.

Simple design, longer life

With only 2 moving parts and a built-in dust prevention system, you get maximum uptime and reliability.

Fewer parts

Up to 30% fewer parts than competition for reduced operating costs and less maintenance.

Environmentally-friendly

Box brackets with noise-reduction design – minimally invasive in urban areas.

Extensive tool range

For use in a large variety applications.

Versatile with any carrier

Low sensitivity to back pressure means the Komatsu breaker can be used with virtually any carrier.

Nitrogen gas cushion

Absorbs piston recoil to reduce vibrations for less stress on the machine and operator.

Dual retainer pins

Ensures proper alignment and spreads wear, for a longer chisel and bushing life.

Simple control valve

Flow-through design for effi cient control with a minimal hydraulic surge.

Dual retainer pins

Ensures proper alignment and spreads wear, for a longer

Patented tie rod design

Short, fully-enclosed tie rods with internal vibration dampeners and patented thread design resist standard wear and tear.

50/50 piston-to-chisel

weight ratio With long stroke for greater energy transfer and less recoil.

Special hardened alloy points

Increases durability in a wide range of applications.

Hydraulic cushioning

Helps to prevent damage caused by inadvertently triggering a “blank” fire

”Accumulator-free” technology

Less maintenance, increased reliability and durability – and lower operating costs.

Underwater application port

Standard on all breakers, for a quick and convenient pressurized air connection.

Auto-lube options

Easily post-fi tted, it eliminates time wasted on manual greasing and ensures correct and continuous lubrication.

SPECS

Expand All
GENERAL
MODEL JTHB120-3 JTHB160-3
Operating weight kg 950 1.240
Oil flow l/min 80-120  100-140
Operating pressure bar 140-180  120-170
Impact rate bpm 450-720 430-600
Tool diameter mm 105 115
Hose size inch 3/4 3/4
Gas pressure bar 11 8
Base machine weight range ton 8-14 14-20
Matching Table
MODEL JTHB120-3 JTHB160-3
Machine weight (tonnes) 8 – 14 14 – 20
Machine models  PC118MR-8 PC160-8
 PC138US-8 PC190-8
PW118MR-8  PW160-8
PW148-8  PW180-10
PW200-7
PW220-7
Tool selection

Optional Equipment

Expand All
Optional Equipment
  • Auto grease system

An optional auto grease system eliminates the need for manual interventions. By greasing the breaker at fixed intervals and with adjustable output, the system improves ease-of-use and extends the lifetime of your breaker and wear parts. Available on the JTHB120-3 and larger breakers, it is fully incorporated into the bracket and doesn’t require an external power source.

  • Underwater use

JTHB breakers can be quickly and easily adapted for underwater use through the optional underwater kit. Compressed air is supplied through the air port on the breaker’s body (included as standard across the range), preventing water from entering the breaker

  • Other special application kits

A number of kits are available for special applications such as:

  • Extreme-temperature environments (hot or cold)
  • Extremely dusty environments
  • Tunnel works

Contact us for more details.

Galadari